- Itray Aluminum Ladder Tray
- Itray Aluminum Straight Sections
- Horizontal Fittings
- Vertical Fittings
- Covers and Connectors
- Splices
- Straight Splice Kit
- Fitting Splice Kit
- Universal Splice Kit
- Universal Blank Splice Kit
- Expansion Splice Kit
- 90° Connection Splice Kit
- Floor Flange Splice Kit
- Horizontal Adjustable Splice Kit
- Vertical Adjustable Splice Kit
- Straight Reducer Splice Kit
- Offset Reducer Splice Kit
- Vertical Hanger Splice Kit
- Reducing Height Splice Kit
- Accessories
- Penetration Sleeves
- Metallic Ladder Tray
- Fiberglass Ladder Tray
- Fiberglass Straight Sections
- Horizontal Fittings
- Vertical Fittings
- Covers & Connectors
- Splicing
- Splice and Connectors Standard
- Splice and Connectors Expansion
- Splice and Connectors 90° Connector
- Splice and Connectors Horizontal Adjustable Splice Plate
- Splice and Connectors Vertical Adjustable Splice Plate
- Vertical Hanger Splice Plate
- Tray-to-Box Connector
- Couplers Horizontal Angle
- Couplers Vertical Angle
- Accessories
- Additional Rung
- Blind End Plate
- Cable Dropout
- Straight Horizontal Dividers
- Vertical Fitting Dividers
- Flexible Horizontal Dividers
- Divider Hold Down Clip
- Thermoplastic Drive Rivet
- Field Cutting Sealant
- Expansion Guide Clamp
- Hold Down Clamp
- Z-Hold Down Clamp
- Support Brackets
- Trapeze Hanger Support Kit (Standard Duty)
- Center Spine Tray
- Channel System
- Cable Runway
- Seismic Bracing
Fasteners for Splices
Knurled Bolt: Specially designed for cable tray connectors, the ribbed neck firmly grips the tray side rail to prevent screw rotation while tightening. Bolt can also be tightened with a Phillips screwdriver.
Flanged Hex Nut: "Free spinning" lock-type nut with a serrated face, eliminating the need for a washer. Nuts require a 9/16" wrench. Tighten to approx. 19-25 ft-lbs of torque.
Locking Hex Nut: For use with expansion connectors. Deformed threads cause this nut to lock on to the bolt after just a few turns, allowing movement of the bolt in the expansion slot without possibility of the nut backing off. Typically identified by a rectangular indentation on the side of the nut.
Flat Washer: For use with expansion connectors. Install under the locking hex nut in the expansion slots. Prevents binding in the expansion slot during movement of the tray due to thermal expansion.
CD
Cadmium-plated Steel
S6
Type 316 Stainless Steel
| DESCRIPTION | SIZE | COMPLETE CATALOG NUMBER |
||
 |
KNURLED BOLT | 3/8" - 16 x 3/4" | DS-8530-01-CD | CD |
| DS-8926-01-S6 | S6 | |||
 |
FLANGED HEX NUT | 3/8" Dia. | DS-8524-01-CD | CD |
| DS-8927-01-S6 | S6 | |||
 |
LOCKING HEX NUT | 3/8" Dia. | DS-8575-02-CD | CD |
| DS-8576-01-S6 | S6 | |||
 |
FLAT WASHER | 3/8" Dia. | DS-8596-01-CD | CD |
| DS-8600-01-S6 | S6 |