Covers

Aluminum Straight Sections Numbering Example:
60 - 5164 - 0012 - 36 - 02 -
Side Rail Height*
40 - 4"
50 - 5"
60 - 6"
70 - 7"
* Side rail height necessary for outside vertical fitting covers.
** Standard length for steel covers hot-dip galvanized after fabrication per ASTMA-123 os 6'-0". 		Cover System No. Length
0006** - 6'
0010 - 10'
0012 - 12'
or
92 24
Fitting Product No.
This identifies fitting type and radius 		Width Fitting Tangent
02
2" Tangents (Series 1)
05
5" Tangents (Series 2)
 Cover Thickness
Letter suffixes are used to indicate alternate cover thicknesses. Leave blank for standard thickness.

A

Aluminum

M

Steel,
Mill galvanized

G

Steel,
Hot-dip galvanized

L

Type 304 Stainless Steel

T

Type 316 Stainless Steel

MATERIAL FLANGE IN 1" FLANGE OUT 1 3/4 " FLANGE OUT
COVER SYSTEM NUMBER
FLAT, SOLID NON- FLANGED A 5061 5137 5067
M 2002 2003 2067
L 3002 3109 3038
T 3042 3110 3039
FLAT, SOLID FLANGED A 5060 5136 5066
M 2000 2001 2066
G 1000 1001 1066
L 3000 3049 3036
T 3005 3090 3029
FLAT, LOUVERED NON-FLANGED A 5003 5147 5085
M 2006 2004 2112
L 3050 3018 3117
T 3041 3116 3112
FLAT, LOUVERED FLANGED A 5006 5145 5071
M 2007 2005 2104
G 1007 1005 1104
L 3070 3118 3003
T 3076 3119 3113
PEAKED 15", SOLID FLANGED A 5164 5180 5165
M 2140 2142 2114
G 1140 1142 1114
L 3128 3130 3131
T 3017 3115 3040
15¼ is standard angle for peaked covers, but custom angles are possible.
Please contact Cablofil/Legrand¨ for more information.
Cover Thickness

A





Standard: 0.040"
H - 0.063"
J - 0.080"
K - 0.090"
L - 0.125"
M - 0.188"
Diamond Treadplate:
S - 0.125"
V - 0.188"

G





Standard: 18 Ga.

M

L

T





Standard: 20 Ga.
A - 18 Gage (0.048")
B - 16 Gage (0.060")
C - 14 Gage (0.075")
D - 12 Gage (0.105")
F - 11 Gage (0.120")
G - 10 Gage (0.135")