Straight strips are for use with all straight ladder tray; flexible strips are for use with all horizontal fittings of any radius. Field-drilled holes are required for installation of all divider strips. Clips should be attached to rungs on alternating sides of the divider strip.
| 9112-99 |
12 |
90° Inside Elbow |
| 9124-99 |
24 |
| 9136-99 |
36 |
| 9212-99 |
12 |
90° Outside Elbow |
| 9224-99 |
24 |
| 9236-99 |
36 |
| 4612-99 |
12 |
45° Inside Elbow |
| 4624-99 |
24 |
| 4636-99 |
36 |
| 4712-99 |
12 |
45° Outside Elbow |
| 4724-99 |
24 |
| 4736-99 |
36 |
| 3112-99 |
12 |
30° Inside Elbow |
| 3124-99 |
24 |
| 3136-99 |
36 |
| 3212-99 |
12 |
30° Outside Elbow |
| 3224-99 |
24 |
| 3236-99 |
36 |
| (2) Hold down clips |
| System No. |
|
|
|
|
| 6F |
- |
9112 |
- |
99 |
|
| F1 |
Series 1 |
| F2 |
Series 2 |
| FI |
Flange In |
| FO |
Flange Out |
 |
| F-1852-PL |
| (3) Thermoplastic Drive Rivets |
 |
| DS-8935-PL |
Used to reseal fiberglass after field modifications. Please note this is a 12 oz. aerosol can & cannot be shipped by air.
 |
| 0937 |
